Popular Components
Shop the most popular RAM® holders and components below! Any holder can be paired with any mounting components, and all components within a given size category are compatible and interchangeable with each other. Build any custom mounting solution fit for your specific needs. All mounting components are backed by a lifetime warranty.
Popular Components - D Size
£78.99 (Incl. VAT)
The RAM-D-201U, standard size double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball...
£25.99 (Incl. VAT)
The RAM-D-254U consists of a 2.25" diameter rubber ball, connected to a 2.5" diameter plate containing the industry standard AMPS hole pattern. This AMPS hole pattern can drill down to any flat surface or...
£33.99 (Incl. VAT)
The RAM-D-246U consists of a 2.25" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.
£31.99 (Incl. VAT)
The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base. The base has pre-drilled holes, including two holes at 180 degrees and three holes at...
£49.99 (Incl. VAT)
The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and...
£39.99 (Incl. VAT)
The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter.
£30.99 (Incl. VAT)
The RAM-D-115BU, universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will...
£77.99 (Incl. VAT)
The RAM-D-271U-2, round pipe base, consists of a 2.25" rubber ball connected that will connect to a pipe tubing diameter from 2" to 2.5" in diameter.
£51.99 (Incl. VAT)
The RAM-D-247U is a clamp base with 2.25" rubber ball that will connect to square posts ranging from 1.75" to 4" in width. Ideal for forklifts, the slotted holes on this base make this...
£38.99 (Incl. VAT)
The RAM-D-246U-IN1 consists of a 2.25" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.
£28.99 (Incl. VAT)
This RAM-D-2462U consists of a 2.25" rubber ball, connected to a 3.6" x 2.1" plate with a 35mm X 75mm VESA hole pattern.
£35.99 (Incl. VAT)
The RAM-D-202U-25 contains a 2.25" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 4.5" center to center.
£26.99 (Incl. VAT)
The RAM-D-202U-23 contains a 2.25" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 2.5" center to center.
£27.99 (Incl. VAT)
The RAM-D-254-WD1U consists of a 2.25" diameter rubber ball, connected to a 2.5" diameter plate containing 7 holes total: the industry standard 4-hole AMPS hole pattern and a 3-hole 120-degree hole pattern. This component...
£32.99 (Incl. VAT)
£30.99 (Incl. VAT)
The RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge....
£37.99 (Incl. VAT)
The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter.
£104.99 (Incl. VAT)
The RAM-D-201U-E, long double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and...
£56.99 (Incl. VAT)
The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot...
£95.99 (Incl. VAT)
The RAM-D-247U-5 consists of a 5" clamp base with 2.25" ball.
£39.99 (Incl. VAT)
The RAM-D-247U-25 consists of a 2.5" clamp base with 2.25" ball.
£37.99 (Incl. VAT)
The RAM-D-202U-IN1 consists of a reinforced post, 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base. The base has pre-drilled holes, including two holes at 180 degrees and three...
£53.99 (Incl. VAT)
The RAM-D-111B-IN1U is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
£73.99 (Incl. VAT)
The RAM Mount RAM-VB-D-110-2U Single Swing Arm with Rotating Plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on...
- 1
- 2