GDS® Hardwire Charger with mUSB Plug and Type-A Port
Ball Base Information
"RAM" Prefix Code
To provide lightweight strength and corrosion resistance, RAM is made of marine grade Aluminium with a black powder coated finish, stainless steel hardware and 'rubber balls' - 'RAM' products are stiffer and stronger than their 'RAP' variants and typically used in more rugged applications.
"RAP" Prefix Code
Many of our 'RAM' products are available in a 'RAP' - composite variant. Our composite 'RAP' products are generally designed for lighter duty applications where keeping the weight of the mount low is a priority.
RAM® BALL SIZES
The weight limits below are a guide only. All factors in a planned mounting configuration should be considered to choose the most suitable ball size.
The most common ball size applications:
B Size - Action Cameras, Phones and Small Tablets
C Size - Medium - Large Tablets in Heavier Duty Applications
D Size - Heavy and Rugged Tablets and Laptops in Commercial Applications
Please check with our technical team for advice.
Leveraging the USB 2.0 OTG mode, the RAM-GDS-CHARGE-OTGAU adapter enables phones and tablets to charge and utilize the OTG accessory mode at the same time. This allows for the use of accessories such as keyboards, a mouse, USB 2.0 Flash drive, barcode scanners, printers, and other devices supported in the USB-IF OTG specification. Eliminating the need for a separate charger, the adapter allows the tablet to be in both host mode and accept a charge of up to 1.67A (at ~5V). The internal charger supports USB 2.0 BC1.2 mode as a DCP mode charger to the host device. The adapter solves the desire to support peripherals and charge through the single Micro-USB port on the host device. Always Protected. Always Connected.®
packaging type
Poly Bag
input voltage
8-40VDC
output voltage
5VDC
output current
2.5A max
input connector
Male mUSB 2.0
input cable length
1.2 Meters
output cable length
1 Meter
transfer speed
USB 2.0 480Mbps (peripheral port speed)
operating temperature
-30°C to +70°C
storage temperature
-40°C to +85°C
ports
USB 2.0 Type-A (on housing)
regulatory
Over Voltage Protection (OVP), Integrated Short Circuit Protection (SCP)
certifications
FCC, Industry Canada, CS, RCM, WEEE, E-Mark, and RoHS Compliant
USB 2.0 BC 1.2 DCP Support
Warranty
3 year warranty
Weight
0.182 kg
Additional Information
Samsung Galaxy Tab A (8.0”, 9.7”, 10.1″)
Samsung Galaxy Tab E (8.0”)²
Samsung Galaxy Tab E (9.6”)
Samsung Galaxy Tab S2 (8.0″, 9.7″)
Samsung Galaxy Tab 4 (8.0″, 10.1″)
Samsung Galaxy Tab S (8.4″, 10.5″)
¹This list is not complete, yet contains tablets that have been tested. There might be changes or previous / subsequent modifications made by the OEM to the listed product that might reduce or eliminate compatibility without notice.
²Supports up to the SM-T377W
